Decoded sidewall size
285/75R24 tire size
285/75R24 in inches: 40.83" overall diameter — 11.22" wide, 8.42" sidewall.
Methodology: dimensions are calculated from standard ETRTO tire-size formulas. Last reviewed June 2026 by the TreadSize editorial team.
Before you fit 285/75R24: verify the vehicle placard, load index, speed rating, wheel offset, and full-lock/full-compression clearance. Nominal dimensions do not guarantee a safe physical fit.
Compare this sizeFull dimensions
| Measurement | Metric | Imperial |
|---|---|---|
| Overall diameter | 1037.1 mm | 40.83 in |
| Section width | 285 mm | 11.22 in |
| Sidewall height | 213.75 mm | 8.42 in |
| Rim diameter | 609.6 mm | 24 in |
| Circumference | 3258.2 mm | 128.27 in |
| Revolutions per mile | 493.9 | |
| Aspect ratio | 75% | |
NHTSA safety record for 285/75R24
Drawn from official U.S. government (NHTSA) consumer complaint and recall filings for this exact tire size — not the generic averages you'll find elsewhere.
1 tire recall on record affecting 285/75R24
- NHTSA 20T007000 · 2020 YOKOHAMA TY517 MC2 A sudden loss of vehicle control increases the risk of a crash.
These are unverified consumer reports and manufacturer recalls filed with the National Highway Traffic Safety Administration — not validated failure rates, and not adjusted for how many tires of this size are in service. Popular sizes naturally accumulate more reports. Use this as a research signal, not a verdict on any specific tire. Data as of 2021. Source: NHTSA Office of Defects Investigation (public domain). Always check the latest recalls at NHTSA.gov and report a tire problem if you have one.
Recall timeline for 285/75R24
NHTSA campaigns affecting this tire size, grouped from the local recall dataset. Exact owner-notification dates are not stored here; open the campaign at NHTSA for current remedy details.
How 285/75R24 compares inside the NHTSA size dataset
This comparison is derived only from tire sizes that have a real NHTSA complaint or recall record in the TreadSize dataset. Source: NHTSA ODI — Consumer Complaints (FLAT_CMPL) + Recalls (FLAT_RCL), U.S. DOT public domain; Complaints through 2021.
Nearby safety records by complaint volume
Dataset download: JSON or CSV. Latest recall lookup: NHTSA.gov.
Frequently asked questions
What is the overall diameter of a 285/75R24 tire?
A 285/75R24 tire has an overall diameter of 40.83 inches (1037.1 mm).
How tall is a 285/75R24 tire?
The sidewall height is 213.75 mm (8.42 inches), and the overall diameter from the ground to the top of the tire is 40.83 inches.
How many revolutions per mile does a 285/75R24 tire make?
A 285/75R24 tire makes approximately 494 revolutions per mile. Your speedometer is calibrated to this number.
What rim size does a 285/75R24 tire fit?
A 285/75R24 tire is designed for a 24-inch rim (609.6 mm).
Are there recalls or safety complaints for 285/75R24 tires?
NHTSA has 0 consumer complaints on record for the 285/75R24 size and 1 recall. These are unverified consumer reports, not validated failure rates, and are not adjusted for how many tires of this size are in service.
All dimensions calculated using standard ETRTO formulas. Always confirm fitment with your vehicle's door-placard and a qualified tire professional before purchasing.