TreadSize

Decoded sidewall size

445/95R25 tire size

445/95R25 in inches: 58.29" overall diameter — 17.52" wide, 16.64" sidewall.

Methodology: dimensions are calculated from standard ETRTO tire-size formulas. Last reviewed June 2026 by the TreadSize editorial team.

445/95R25 tire detail photo with TreadSize diameter, width, and rim measurement card
Overall diameter 58.29 in 1480.5 mm
Section width 17.52 in 445 mm
Sidewall height 16.64 in 422.75 mm
Revs / mile 346 speedo calibration

Before you fit 445/95R25: verify the vehicle placard, load index, speed rating, wheel offset, and full-lock/full-compression clearance. Nominal dimensions do not guarantee a safe physical fit.

Compare this size

Full dimensions

Measurement Metric Imperial
Overall diameter 1480.5 mm 58.29 in
Section width 445 mm 17.52 in
Sidewall height 422.75 mm 16.64 in
Rim diameter 635 mm 25 in
Circumference 4651.1 mm 183.12 in
Revolutions per mile 346.0
Aspect ratio 95%

NHTSA safety record for 445/95R25

Drawn from official U.S. government (NHTSA) consumer complaint and recall filings for this exact tire size — not the generic averages you'll find elsewhere.

Complaints on record 0 filed with NHTSA
Recalls on record 1 see below

1 tire recall on record affecting 445/95R25

  • NHTSA 20T012000 · 2020 BRIDGESTONE V-STEEL HIGHWAY SERVICE If the operator unknowingly exceeds the maximum speed, load, and corresponding inflation pressure specifications, there may be an increased risk of a crash.
Look up these campaign numbers at NHTSA.gov →

These are unverified consumer reports and manufacturer recalls filed with the National Highway Traffic Safety Administration — not validated failure rates, and not adjusted for how many tires of this size are in service. Popular sizes naturally accumulate more reports. Use this as a research signal, not a verdict on any specific tire. Data as of 2021. Source: NHTSA Office of Defects Investigation (public domain). Always check the latest recalls at NHTSA.gov and report a tire problem if you have one.

Recall timeline for 445/95R25

NHTSA campaigns affecting this tire size, grouped from the local recall dataset. Exact owner-notification dates are not stored here; open the campaign at NHTSA for current remedy details.

Open size recall page

How 445/95R25 compares inside the NHTSA size dataset

Complaint rank #241 of 271 among 271 safety-record sizes
Vs dataset median 10 below median 10 complaints
Top failure share 0% No leading category

This comparison is derived only from tire sizes that have a real NHTSA complaint or recall record in the TreadSize dataset. Source: NHTSA ODI — Consumer Complaints (FLAT_CMPL) + Recalls (FLAT_RCL), U.S. DOT public domain; Complaints through 2021.

Dataset download: JSON or CSV. Latest recall lookup: NHTSA.gov.

Frequently asked questions

What is the overall diameter of a 445/95R25 tire?

A 445/95R25 tire has an overall diameter of 58.29 inches (1480.5 mm).

How tall is a 445/95R25 tire?

The sidewall height is 422.75 mm (16.64 inches), and the overall diameter from the ground to the top of the tire is 58.29 inches.

How many revolutions per mile does a 445/95R25 tire make?

A 445/95R25 tire makes approximately 346 revolutions per mile. Your speedometer is calibrated to this number.

What rim size does a 445/95R25 tire fit?

A 445/95R25 tire is designed for a 25-inch rim (635 mm).

Are there recalls or safety complaints for 445/95R25 tires?

NHTSA has 0 consumer complaints on record for the 445/95R25 size and 1 recall. These are unverified consumer reports, not validated failure rates, and are not adjusted for how many tires of this size are in service.

All dimensions calculated using standard ETRTO formulas. Always confirm fitment with your vehicle's door-placard and a qualified tire professional before purchasing.