TreadSize

Decoded sidewall size

285/45R22 tire size

285/45R22 in inches: 32.10" overall diameter — 11.22" wide, 5.05" sidewall.

Methodology: dimensions are calculated from standard ETRTO tire-size formulas. Last reviewed June 2026 by the TreadSize editorial team.

285/45R22 tire detail photo with TreadSize diameter, width, and rim measurement card
Overall diameter 32.10 in 815.3 mm
Section width 11.22 in 285 mm
Sidewall height 5.05 in 128.25 mm
Revs / mile 628 speedo calibration

Before you fit 285/45R22: verify the vehicle placard, load index, speed rating, wheel offset, and full-lock/full-compression clearance. Nominal dimensions do not guarantee a safe physical fit.

Compare this size

Full dimensions

Measurement Metric Imperial
Overall diameter 815.3 mm 32.10 in
Section width 285 mm 11.22 in
Sidewall height 128.25 mm 5.05 in
Rim diameter 558.8 mm 22 in
Circumference 2561.3 mm 100.84 in
Revolutions per mile 628.3
Aspect ratio 45%

NHTSA safety record for 285/45R22

Drawn from official U.S. government (NHTSA) consumer complaint and recall filings for this exact tire size — not the generic averages you'll find elsewhere.

Complaints on record 6 filed with NHTSA
Recalls on record 1 see below

1 tire recall on record affecting 285/45R22

  • NHTSA 18T001000 · 2018 VOGUE SIGNATURE V Missing TIN information can make it difficult for owner to identify the tire in the event of a recall, potentially increasing the risk of driving with a recalled tire which could r
Look up these campaign numbers at NHTSA.gov →

What owners report fails — 285/45R22

  • Blowout 4
  • Out of round 1
  • Tread separation 1

These are unverified consumer reports and manufacturer recalls filed with the National Highway Traffic Safety Administration — not validated failure rates, and not adjusted for how many tires of this size are in service. Popular sizes naturally accumulate more reports. Use this as a research signal, not a verdict on any specific tire. Data as of 2021. Source: NHTSA Office of Defects Investigation (public domain). Always check the latest recalls at NHTSA.gov and report a tire problem if you have one.

Recall timeline for 285/45R22

NHTSA campaigns affecting this tire size, grouped from the local recall dataset. Exact owner-notification dates are not stored here; open the campaign at NHTSA for current remedy details.

Open size recall page

How 285/45R22 compares inside the NHTSA size dataset

Complaint rank #170 of 271 among 271 safety-record sizes
Vs dataset median 4 below median 10 complaints
Top failure share 67% Blowout

This comparison is derived only from tire sizes that have a real NHTSA complaint or recall record in the TreadSize dataset. Source: NHTSA ODI — Consumer Complaints (FLAT_CMPL) + Recalls (FLAT_RCL), U.S. DOT public domain; Complaints through 2021.

Dataset download: JSON or CSV. Latest recall lookup: NHTSA.gov.

Frequently asked questions

What is the overall diameter of a 285/45R22 tire?

A 285/45R22 tire has an overall diameter of 32.10 inches (815.3 mm).

How tall is a 285/45R22 tire?

The sidewall height is 128.25 mm (5.05 inches), and the overall diameter from the ground to the top of the tire is 32.10 inches.

How many revolutions per mile does a 285/45R22 tire make?

A 285/45R22 tire makes approximately 628 revolutions per mile. Your speedometer is calibrated to this number.

What rim size does a 285/45R22 tire fit?

A 285/45R22 tire is designed for a 22-inch rim (558.8 mm).

Are there recalls or safety complaints for 285/45R22 tires?

NHTSA has 6 consumer complaints on record for the 285/45R22 size and 1 recall; the most reported issue is blowout (4 reports). These are unverified consumer reports, not validated failure rates, and are not adjusted for how many tires of this size are in service.

All dimensions calculated using standard ETRTO formulas. Always confirm fitment with your vehicle's door-placard and a qualified tire professional before purchasing.