Nominal size comparison
285/40R22 vs 295/40R22
Diameter +1.02% · At indicated 60 mph: 60.61 mph estimated · Nominal radius change +4.0 mm
Calculated from nominal size labels. Instrument estimates assume unchanged calibration to the original size. Actual rolling circumference, clearance and tire specifications are not measured.
Within ±3% nominal diameter
The diameter difference is within this calculator's ±3% comparison band. This geometry does not verify vehicle fitment, wheel compatibility, load capacity, or calibration. Check vehicle and tire manufacturer specifications before fitting.
Visual diameter overlay
Installation still unverified
Small geometry change
- Diameter is within the ±3% geometry comparison band; vehicle fitment is not verified.
- New tire is 10 mm wider; check inner strut clearance, fender clearance, and wheel offset.
- Check the vehicle placard and owner's manual for size and pressure, and confirm load and speed requirements with the vehicle and tire manufacturer. These are geometry estimates only.
Speedometer effect
When the vehicle's speedometer (calibrated to 285/40R22) reads 60 mph, the estimated speed with 295/40R22 mounted is:
Estimated speed change relative to indicated: +1.02% · Odometer reads low by 1.01% relative to actual distance. Per 100 actual miles, it records 98.99 miles (unchanged calibration).
Full comparison
| Measurement | 285/40R22 | 295/40R22 | Delta |
|---|---|---|---|
| Overall diameter | 30.98" | 31.29" | +1.02% |
| Section width | 285 mm | 295 mm | +10 mm |
| Sidewall height | 114 mm | 118 mm | +4.00 mm |
| Rim diameter | 22" | 22" | +0" |
| Circumference | 2472 mm | 2497 mm | +25 mm |
| Revs / mile | 651 | 645 | -7 |
| Nominal radius change | +4.0 mm | ||
Questions about this swap
What is the diameter difference between 285/40R22 and 295/40R22?
295/40R22 is 1.02% larger in overall diameter than 285/40R22 — a difference of 8.0 mm (0.31 inches).
How does 295/40R22 affect the speedometer if the car was calibrated for 285/40R22?
When the speedometer reads 60 mph (calibrated for 285/40R22), the estimated speed with 295/40R22 is 60.61 mph — an error of +1.02%.
Is it safe to replace 285/40R22 with 295/40R22?
Within ±3% nominal diameter. The diameter difference is within this calculator's ±3% comparison band. This geometry does not verify vehicle fitment, wheel compatibility, load capacity, or calibration. Check vehicle and tire manufacturer specifications before fitting.
All calculations use standard ETRTO formulas. Confirm fitment with a qualified tire professional and your vehicle's door-placard before purchasing.